Bryston 2B-LP Power Amp Black 120v FREE SHIPPING

Description

The  Bryston  2B-LP  amplifier  is  a  compact,  high  quality  60  watt per  channel,  (8  ohms),  stereo  amplifier  intended  for  use  in home  sound  systems  requiring  a  musically  accurate,  extremely reliable, no compromise power source. While  the  2B-LP  has  for  years  been  thought  of  as  an exceptionally  lucid  and  transparent  amplifier  for  traditional two-channel  stereo  setups,  it  is  now  finding  additional acceptance  in  such  installations  as  multimedia  surround-sound systems,  and  in  the  most  ambitious  music  systems  with  multiamplified  speakers  using  electronic  crossovers.
Features  include:  Completely  separate  stereo  channels, including  dual  power  supplies,  to  prevent  any  interaction between  left  and  right  signals,  for  precise  soundstaging and  image  quality.  Green/red  power/clipping  lights  to  give immediate  indication  of  any  overload  or  fault  condition. Rear-mounted  ground  lift  switching  to  avoid  potential  ground loops  and  system  hum.  Gold  plated  five-way  binding  posts and  gold  plated  RCA  connectors  to  prevent  any  possibility of  long  term  corrosion  or  connector  distortion.
Finally,  higher power  monaural  operation  is  as  easy  as  the  flick  of  a  rearmounted  stereo/mono  switch. Bryston  exclusively  uses  only  the  finest  components  in our  designs,  such  as  1%  metal-film  resistor,  polystyrene capacitors  and  hand-matched  transistors  to  reduce  noise and  distortion  to  an  absolute  minimum.  All  signal  circuitry is  fully  discrete  to  avoid  the  compromises,  phase  shift  and nonlinearities  inherent  in  IC’s.  Bryston  applies  techniques and  employs  custom  materials  in  our  everyday  construction of  electronic  equipment  which  are  more  typically  found  in military  and  aerospace  industries. If  your  requirements  are  sonic  excellence,  ultimate  reliability, system  flexibility  and  superb  value,  Bryston  power  amplifiers will  surpass  your  every  performance  criterion. 2B-LP
SPECIFICATIONS Watts Harmonic   distortion IM distortion Noise Crosstalk Slewing rate 60 watts per channel, 8 ohms 100 watts per channel, 4 ohms 200 watts, bridged, 8 ohms Less  than  0.01%  from  20Hz  to  20kHz  at  60 watts Less  than  0.01%  from  10  milliwatts  to  60  watts 100dB below full output Below noise 20Hz to 20kHz at 50 watts Greater than 60 volts per microsecond Power bandwidth  .5Hz to over 100kHz Damping factor  Over 500 at 20 Hz, ref. 8 ohms Input sensitivity 0.75 volt in for full output 50k and impedance  40k - balanced Features Dimensions Bridging switch Over 1600cm2  of heatsinking; over 3200cm2  with chassis Regulated  power  supplies  to  all  voltage gain  stages Each channel separated back to the linecord Dual-colour  LED  pilot  lights  for  each  channel, indicating green at normal levels, flashing red at clipping Will deliver full output to any phase angle at 4 ohms or higher Gold-plated RCA jacks Balanced or unbalanced input 19 x 1.7 x 10 inches, 48.25 x 4.44 x 25.4 cm, wt: 18 lbs, 8 kg