Crown XTi 1000 Power Amplifier with DSP - Free Shipping

Description

Excellent Used Condition. Tested and approved. Packed carefully and shipped quickly.
Crown Audio XTI1000
Overview
The
XTi 1000
from
Crown Audio
is a lightweight and rugged power amplifier designed for portable PA applications. It offers highly accurate sound reproduction with very low distortion, perfect for music or voice playback. It has a switch-mode universal power supply so it can be used anywhere. It handles a wide range of speaker impedances and outputs for a high degree of system compatibility.
The XTi 1000 offers two 3-pin XLR input jacks, as well as two XLR male link/out jacks, two Neutrik Speakon output connectors, and two binding post outputs in parallel with the Speakon connectors. Internal protection circuitry protects against damage from short circuits, overheating, overloads, and more. The XTi 1000 also offers digital signal processing with EQ, crossover filters, delay, speaker presets, and a subharmonic synthesizer. A front-panel LCD displays information and makes interfacing with the amplifier an easy task.
Lightweight and rugged 2U rack space unit
Accurate sound reproduction with very low distortion
Two XLR female input connectors
Outputs include 2 XLR link/out connectors, 2 Neutrik Speakon connectors, and 2 binding post outputs
Switch-mode universal power supply accepts a variety of AC line voltage
Stereo and bridge-mono modes handle a wide variety of impedances
Protection circuitry prevents damage from short circuits, overheating, and overloads
Digital signal processing includes speaker presets, EQ, delay, crossover filters, and a subharmonic synthesizer
Front-panel LCD
Front-panel LEDs for power, signal, clip, ready, and temperature
Crown Audio XTI1000 Specs
Output Power
700W @ 2 Ohms Stereo (per Channel)
500W @ 4 Ohms Stereo (per Channel)
275W @ 8 Ohms Stereo (per Channel)
1400W @ 4 Ohms Bridged-Mono
1000W @ 8 Ohms Bridged-Mono
Damping Factor
> 500
Input Sensitivity
1.4V
Input Impedance
20 kOhms (Balanced)
10 kOhms (Unbalanced)
Gain
30.5dB @ 1kHz, 8 Ohm Rated Output
Frequency Response
+0/-1dB from 20Hz to 20kHz @ 1W into 4 Ohms
Signal-to-Noise Ratio
100dB
Total Harmonic Distortion (THD)
1% or Less
Input Connections
2 x 3-Pin XLR Female
1 x AC Power Connector
Output Connectors
2 x 3-Pin XLR Male Link/Out Connectors
2 x Neutrik Speakon NL4MP Connectors
2 x Binding Post Outputs (In Parallel with Speakon Connectors)
1 x Type B USB Connector for HiQnet
Controls Front Panel
1 x Power Switch
2 x Detented Rotary Level Controls
3 x Buttons for Select, Previous, and Next
Controls (Rear)
None
Indicators
Front Panel LCD Shows Speaker Presets
Front Panel LEDs for Power, Signal, Ready, Clip, and Temp
Cooling
Proportional Speed Fan with Front-to-Rear Airflow
Power Consumption
No More Than 30W at Idle
Power Requirements
100-120V, 220-240V, 50/60 Hz
Dimensions
19 x 3.5 x 12.25" (483 x 89 x 311mm)
Weight
18.5 lbs (8.4kg)
Specialties
DSP Includes EQ, Crossover Filters, Delay, and Subharmonic Synthesizer
Protection for Short Circuits, Overloads, and Overheating