H&r BILSTEIN B4 sport suspension for Audi A3 8P Sportback 8PA Shock Absorber ABE

Description

You are bidding on a sport suspension with components from the well-known manufacturers bilsteinfor the
Audi A3 (8P1) and A3 Sportback (8PA)
.
The shortened B4 gas pressure shock absorbers are suitable for a lowering of up to 50 mm and are therefore the ideal complement to the springs from H&R.
Manufacturer:
H&R / bilstein
Model year:
from 05.03
Document:
The dampers are registration-free.
The H&R springs have one
ABE
, ie compared to many other springs you save yourself an entry at the TÜV and thus 1h time and approx. Take this into account when comparing prices with other chassis.
Lowering front / rear:
35mm / 35mm
Fitness:
2WD, not for Quattro models
Attention! Important
: It is imperative that you measure and report the strut diameter of your shock absorbers. There are two versions: 50 and 55 mm, see figure 3.
Scope of delivery:
1 complete set consisting of 4 springs , front and rear, + 4 bilsteinfor front and back.
I leave out the usual marketing texts, you can find them on the manufacturer's website. Only so much: Here you get a really good and inexpensive chassis for your Audi. Install and drive off without a TÜV visit!
Please let me know the front axle load of your Audi in the sales process so that you can get the right set of springs. You can find the VA load in the vehicle registration document under 7.1.
Delivery time is about. 3 days. It is possible that springs and dampers are shipped separately due to size and weight.
German version:
You are bidding on a kit of 4 lowering springs for the
Audi A3 (8P1) and A3 Sportback (8PA)
.
+ 4 bilstein B4 shock absorbers, a complete suspension kit for front and rear axles. Please also consult the above compatibility list.
The bilstein B4 shock absorbers are the shortened sport version and are suitable for lowering springs up to 50 mm.
Here the technical data of the kit:
Manufacturer:
H&R / bilstein
Model:
from 05.2003
Approval:
German TÜV papers
Lowering approx. FA / RA :
35mm / 35mm
Compatibility springs:
2WD, not suitable for Quattro models
IMPORTANT:
you have to measure the outer diameter of your front axle struts and tell us in the eBay checkout/Paypal message field. Compare image #3. Could be 50mm or 55mm.
You get:
1 entire set of four springs, front and rear + 4 bilstein B4 dampers also for front and rear axle.
If you are uncertain about the suitability of this kit for your own Audi, please contact me through eBay's "ASK" function.
Please state front axle load and engine type in the eBay checkout / Paypal message field.
Otherwise it is not possible to deliver the right kit.
Typical delivery time of this bundle in the EU is 4-5 working days. No shipping to Channel Islands, other remote areas like Scottish Highlands are ok.
Document: The dampers are registration-free. The H&R springs have one ABE, ie compared to many other springs you save yourself an entry at the TÜV and thus 1h time and approx. Take this into account when comparing prices with other chassis. I leave out the usual marketing texts, you can find them on the manufacturer's website. Only so much: Here you get a really good and inexpensive chassis for your Audi. Install and drive off without a TÜV visit! Please let me know the front axle load of your Audi in the sales process so that you can get the right set of springs. You can find the VA load in the vehicle registration document under 7.1. You are bidding on a kit of 4 lowering springs for the Audi A3 (8P1) and A3 Sportback (8PA). + 4 bilstein B4 shock absorbers, a complete suspension kit for