H&R Coilover Suspension Monotube 28916-4 for VW Polo

Description

H&R Coilover Suspension Monotube 28916-4 for VW Polo
H&R Monotube coilovers offer race-bred performance without sacrificing ride comfort. German-made gas shock absorbers built to H&R's rigid specifications are combined with H&R sport or race progressive rate springs for optimum ride quality on the street and uncompromising performance at the track. Like all H&R coilovers, these Monotube coilovers feature a threaded shock body that allows virtually infinite ride height adjustments to suit street or track use.
Monotube gas shock absorbers for precise handling response
Inverted design reduces unsprung weight for precise handling
Trapezoid threaded shock body for virtually infinite height adjustment
Zinc-phosphate coated shock tubes offer an attractive finish and corrosion protection
H&R precision wound coil springs
Adjustment wrenches included
Extensive testing in accordance with the German TÜV
Engineered and munfactured in Germany
Each coilover shock is custom valved to work in connection with a precision-engineered H&R spring, creating a finely tuned suspension system. The individual height adjustment results in a lower center of gravity and improved performance and control. Using premium quality materials, H&R engineers fine-tune each coil over shock with a progressive rate spring to ensure better handling and premium ride comfort.
Height adjustable (not hardness adjustable)
33.) Please note before purchase: This suspension is a very low version! Customer and/or workshop is responsible for clearance necessary work and/or additional other modifications/changes. This rework and/or arising cost is not covered by H&R.
Please note additional information and vehicle-specific technical notes!
Note DCC: The installation of this suspension into cars with an electronic damping adjustment (DCC Magnetic Ride etc.) must be done in an authorized (Audi - VW- etc.) workshop. The signal of the electronic damping adjustment in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
Note: Prior in case of ordering check: Front top shock absorber fixation to the body with one nut not for fixations with three bolts.
low Version
This item fits for:
Manufacturer
Model
Lowering in mm (FA/RA)
Axle load (FA/RA)
VW
POLO V (6R1 6C1)
40-50mm/60-70mm